Pivot Donut Kit | Pivot/Glass Adapter | Dual O-ring and Silicone Version | 4 - Pack
The Pivot Donut Kit is the same adapter from the PivotPro, WPA, or GlassTop Kits. If you have the Tug glass or your own downstem, this kit will let you use those with your Pivot.
Includes:
2 - V2 Donut with dual o-rings
2 - V3 Donut Silicone
***************************************************
The V2 Donut has been designed to use o-rings to create a proper seal with the Tug glass. The 3d printed part does not touch the Pivot and there's very minimal contact with the Tug glass. The adapter is made from PETG.
The V3 Donut is Silicone. It also sits comletely on the outside of the glass. This further reduces the amount of 3d printed parts near the chamber. The V3 version will have greater compatibility as seen with my GlassTop Kit.
***************************************************
For best performance, remove the silicon sleeve. The chamber can be removed from the sleeve without damaging it or cutting the mouth piece. Set it aside.
***************************************************
Compatible options:
Carb Caps:
Puffco Ball Cap grommet works well with any of the above. Other grommets may work. You push the grommet down into the glass. It will be a tight fit on the GLV glass, but works.
Different joysticks or spinners will perform differently. Always start with a slow inhale on any glass option.
***************************************************
Material: PETG
Print quality as seen
Most orders ship within 1-3 business days
But please allow upto 2 weeks for processing
Items are hand assembled and tested for fitment
***************************************************
